Analysis of the use of glass bottle molds

author:安迪必威电竞官方网站 Release time:2016-01-10

 The material of glass mold is made of gray iron is heat-resistant, in the process of production is not easy degradation, but after a long time to use at high temperatures and the oxidation of release agent how much will a bit damaged. The mold is pulled down without cleaning and maintenance. Use high pressure air pump and fine sand and water to clean, then repair with the welding gun and then wipe the butter. A set of glass bottle molds can produce about 400,000 glass bottles to replace the molds. As long as we have damaged molds in our factory, we will maintain and maintain for free.

The commonly used glass bottle mould materials include ordinary low alloy cast iron, ball and vermicular cast iron, d-type graphite cast iron, alloy steel, nickel base alloy, copper base alloy, mould coating and other material. The main requirements of mould materials are anti-oxidation, anti-growth and thermal fatigue resistance.
Glass from the feeder fall into the mold, and cannot make mould scratches and wear, the mould have higher demand high temperature hardness, mould life spans are damaged by marginal place, therefore also must needs die wear resistance, mold material if the processing is simple and has good welding function, can shorten the processing time, also in repair simple repair welding correction, the scale and capacity of the mould should have at the moment will be accuracy, is a combination of high accuracy, in order to satisfied the user demand for glass bottle.
Browse through cooler bottom die Mouth ring Relevant content
Attn:Mr. Zhang Tel:+86-317-8888061 fax:+86-317-8888560
Website:www.andymould.com address:Zehua Road, Huanghua Economic & Development Zone,Huanghua City, Hebei Province, China 061100
HEBEI ANDY MOULD CO., LTD. (c)2015-2016 www.andymould.com All Rights Reserved For the record:冀ICP备15029492号-1